Ford Transit Custom Archives - Commercial Vehicle News

Fitting a Rhino Black KammRack to a New Model 2024 Transit Custom LWB

vanroofrack.co.uk — Mon, 11 Mar 2024 20:36:00 +0000

Rhino Black KammRack Roof Rack Fitting Guide for Ford Transit Custom

Fitting guide and short review · Estimated install time: 60–90 minutes

Introduction

The Rhino Black KammRack is a sleek, durable roof rack system designed to enhance the functionality and appearance of your Ford Transit Custom. This guide walks you through preparation, fitting, and final checks, and includes a short review based on our install.

The Rhino Black KammRack roof rack is a cutting-edge roof rack system designed to enhance the functionality and aesthetics of your brand new Ford Transit Custom van.

In conclusion, the Rhino Black KammRack is a top-of-the-line roof rack system that combines durability, functionality, and style.

Source: original attached document

Product link and quick specs

Buy the exact model used in this guide: Rhino KammRack Black Roof Rack — 3.2m x 1.4m (B616).

Key specs (from product page): Length 3200mm; Width 1400mm; Number of bars 7; Product weight approx. 28–30 kg; Colour: Black.

What you’ll need

Tools: 13mm wrench, 10mm socket, screwdriver, measuring tape, torque wrench (recommended), step ladder.
Safety: Eye protection, gloves, and a helper for lifting heavy parts.
Time: 60–90 minutes (one person); 30–45 minutes (two people).

Step-by-step installation

1. Preparation and pre-assembly

Unbox and lay out all components on cardboard to avoid scratches; count parts against the parts list. Assemble crossbars and feet loosely so you can fine-tune alignment once on the roof.

New Ford Transit Custom with boxed Rhino Black KammRack ready for fitting.

Parts unboxed and counted before assembly.

2. Preparing the roof

Park on a level surface and remove the factory bolt covers from the Transit Custom roof. Clean the mounting area and inspect for corrosion or damage before fitting.

Removing factory bolt covers before fitting the rack.

Removing bolts from the Transit Custom roof.

3. Fitting the roof bars

Position the assembled rack on the roof and align with the factory bolt holes. Insert bolts and hand-tighten; use a measuring tape to centre the rack left-to-right. Leave bolts slightly loose to allow final alignment of side rails and crossbars.

Bolting roof bars into the exposed bolt holes.

4. Fitting the side rails and crossbars

Attach side rails to the crossbars and set crossbar spacing to suit your load. Tighten bolts progressively and, where possible, torque to the manufacturer’s specification.

Side rail lined up on the roof bars.

Side rails attached; Rhino logo visible.

5. Final inspection and test

Inspect every fastener and torque to spec where possible. Gently shake the rack to confirm stability and re-check bolts after the first 50 miles and after heavy loads.

Left-side view of the fitted Rhino Black KammRack.

Rear view of the fitted Rhino Black KammRack.

Right-side view of the fitted Rhino Black KammRack.

Quick tips

Use a torque wrench to avoid over- or under-tightening.
Protect paint with soft cloths or cardboard while working.
If you have a high-roof Transit Custom, use a stable step or ladder for safe access.
Check Rhino’s load limits and warranty details before carrying heavy loads.

Short review

Design: Black powder-coated finish that resists corrosion and complements the Transit Custom.

Functionality: Adjustable crossbars for varied cargo types and easy customization.

Durability: Heavy-duty steel and aluminium construction built to withstand heavy loads and harsh weather.

Installation: Straightforward with basic tools; clear instructions included in the kit.

The post Fitting a Rhino Black KammRack to a New Model 2024 Transit Custom LWB appeared first on Commercial Vehicle News.

Ford Transit Custom H2 Mounting Points | High Roof Roof Rack Fitting Guide

vanroofrack.co.uk — Sun, 27 Nov 2022 18:33:14 +0000

Ford Transit Custom H2 Mounting Points – How to Fit a Roof Rack to a High Roof Transit Custom

One of the most common questions we receive is how to fit a roof rack to a Ford Transit Custom High Roof (H2). Unlike the standard H1 model, the H2 doesn’t have obvious roof rack fixing points visible on the roof, which can leave owners wondering where the roof rack should be mounted.

The good news is that Ford has already marked the correct mounting positions for you. Every Ford Transit Custom H2 is equipped with six factory-marked mounting locations built into the roof structure, making it possible to safely fit vehicle-specific roof bars and roof racks.

Where Are the Roof Rack Mounting Points on a Ford Transit Custom H2?

The Ford Transit Custom High Roof (H2) uses six reinforced roof rack mounting points. These are identified by small circular dimples pressed into the roof panel during manufacture.

There are three mounting positions on each side of the roof. These dimples indicate exactly where compatible roof rack systems should be installed.

At first glance it can appear that you’ll need to measure up the roof and determine the fixing locations yourself, but the factory dimples remove the guesswork and ensure the roof rack is positioned correctly.

Ford Transit Custom H2 roof rack mounting point locations.

Do You Need to Drill a Ford Transit Custom H2 Roof?

Yes. Most Ford Transit Custom H2 roof rack systems require drilling at the six factory-marked mounting positions. The reinforced fixing locations are designed specifically for this purpose and are used by manufacturers such as Rhino Products and Van Guard.

All compatible roof racks and roof bars are supplied with vehicle-specific fitting kits and detailed installation instructions, making it straightforward to locate and prepare the fixing points correctly.

Ford Transit Custom H2 Roof Racks and Roof Bars

We supply a wide range of roof bars and roof racks specifically designed for the Ford Transit Custom 2013-2023 High Roof (H2).

Whether you’re looking for lightweight roof bars for ladders and pipe carriers or a full aluminium roof rack with a rear roller, we stock solutions from leading manufacturers including Rhino Products and Van Guard.

View Ford Transit Custom H2 Roof Racks

Suitable for L1 H2 and L2 H2 Models

Our range includes roof racks and roof bars for both:

Ford Transit Custom L1 H2 (Short Wheelbase High Roof)
Ford Transit Custom L2 H2 (Long Wheelbase High Roof)

Each system is designed specifically for the H2 roof profile and supplied with the correct brackets, fixings and instructions for installation.

Ford Transit Custom H2 Fitting Instructions

If you would like to review the installation process before purchasing, the following fitting instructions are available to download.

Frequently Asked Questions

How many mounting points does a Ford Transit Custom H2 have?

A Ford Transit Custom High Roof (H2) has six roof rack mounting locations, identified by dimples in the roof panel. There are three fixing positions on each side of the roof.

Can I fit roof bars to a Ford Transit Custom High Roof?

Yes. Both roof bars and full roof racks are available for Ford Transit Custom H2 models. The correct choice depends on the type of equipment and materials you need to carry.

Do all Ford Transit Custom H2 roof racks use the same mounting points?

Compatible roof rack systems from Rhino Products and Van Guard use the factory-marked mounting positions provided by Ford on the H2 roof.

Need Help Choosing the Correct H2 Roof Rack?

If you’re unsure which roof rack or roof bar system is suitable for your van, our team can help.

Browse our full range of Ford Transit Custom High Roof (H2) Roof Racks or contact us at sales@vanroofrack.co.uk for advice.

The post Ford Transit Custom H2 Mounting Points | High Roof Roof Rack Fitting Guide appeared first on Commercial Vehicle News.